Looking for similar products?
Aruba IAP-207 (RW) Instant 2x2:2 11ac AP (JX954A)
  • Aruba 207 Series Access Points (Center facing)
  • Aruba JX954A (Main)
  • Aruba JX954A
  • Default Image - Networking - Series (Center facing)
  • Aruba JX954A (Original)
  • Aruba 207 Series Access Points (Rear facing)

Actual product may differ

  • Aruba logo
  • 3492741
  • JX954A
  • 190017087801
  • Aruba
  • Wireless/WiFi
Product was discontinued 30 Jul 20

Don’t worry, we may have more Wireless/WiFi from Aruba in stock.

Overview

  • UNIQUE BENEFITS
    • Dual Radio 802.11ac Access Point
      • Supports up to 867 Mbps in the 5GHz band (with 2SS/VHT80 clients) and up to 400 Mbps in the 2.4GHz band (with 2SS/VHT40 clients)
    • Built-in Bluetooth Low-Energy (BLE) radio
      • Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time
      • Enables management of a network of Aruba Beacons
    • Advanced Cellular Coexistence (ACC)
      • Minimizes interference from 3G/4G cellular networks, distributed antenna systems and commercial small cell/femtocell equipment.
    • Quality of service for app visibility and control
      • Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing
    • RF Management
      • Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs
      • The Aruba 207 Series APs can be configured to provide part-time or dedicated air monitoring for wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, and wireless mesh connections where Ethernet drops are not available.
    • Intelligent app visibility and control
      • AppRF technology leverages deep packet inspection to classify and block, prioritize or limit bandwidth for over 2,500 enterprise apps or groups of apps
    • Security
      • Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
      • IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
      • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys
    CHOOSE YOUR OPERATING MODE
    • Aruba 207 Series APs offer a choice of operating modes to meet your unique management and deployment requirements.
    • Controller-managed mode – When managed by Aruba Mobility Controllers, Aruba 207 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding
    • Aruba Instant mode – In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes. If WLAN requirements change, a built-in migration path allows 207 Series Instant APs to become part of a WLAN that is managed by a Mobility Controller.
    • Remote AP (RAP) for branch deployments
    • Air monitor (AM) for wireless IDS, rogue detection and containment
    • Secure enterprise mesh
    • For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, the Instant APs are factory-shipped to any site and configure themselves when powered up.
    SPECIFICATIONS
    • AP-207 (controller-managed) and IAP-207 (Instant):
      • 802.11ac – 5GHz 2x2 MIMO (867 Mbps max rate) and 2.4GHz 2x2 MIMO (400 Mbps max rate) radios, with a total of two integrated omni-directional downtilt dualband antennas
    WI-FI RADIO SPECIFICATIONS
    • AP type: Indoor, dual radio, 5GHz 802.11ac 2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO
    • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
    • 5GHz: Two spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate to individual 2x2 VHT80 client devices
    • 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400 Mbps wireless data rate to individual 2x2 VHT40 client devices (300 Mbps for HT40 802.11n client devices)
    • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
    • Supported frequency bands (country-specific restrictions apply):
      • 2.400 to 2.4835 GHz
      • 5.150 to 5.250 GHz
      • 5.250 to 5.350 GHz
      • 5.470 to 5.725 GHz
      • 5.725 to 5.850 GHz
    • Available channels: Dependent on configured regulatory domain
    • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
    • Supported radio technologies:
      • 802.11b: Direct-sequence spread-spectrum (DSSS)
      • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • Supported modulation types:
      • 802.11b: BPSK, QPSK, CCK
      • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (conducted) transmit power (limited by local regulatory requirements):
      • 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)
      • 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2)
      • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
    • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
    • Maximum ratio combining (MRC) for improved receiver performance
    • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
    • Short guard interval for 20 MHz, 40 MHz and 80 MHz channels
    • Space-time block coding (STBC) for increased range and improved reception
    • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
    • Transmit beam-forming (TxBF) for increased signal reliability and range
    • Supported data rates (Mbps):
      • 802.11b: 1, 2, 5.5, 11
      • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
      • 802.11n: 6.5 to 300 (MCS0 to MCS15)
      • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11ac very high throughput (VHT) support: VHT 20/40/80
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
  • WI-FI ANTENNAS
    • AP-207/IAP-207: Two integrated dual-band downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 3.4dBi in 2.4GHz and 6.6dBi in 5GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
      • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 2.2dBi in 2.4GHz and 4.5dBi in 5GHz.
    OTHER INTERFACES
    • One 10/100/1000BASE-T Ethernet network interface (RJ-45)
      • Auto-sensing link speed and MDI/MDX
      • 802.3az Energy Efficient Ethernet (EEE)
    • Bluetooth Low Energy (BLE) radio
      • Up to 3dBm transmit power (class 2) and -92dBm receive sensitivity
      • Integrated antenna with roughly 30 degrees downtilt and peak gain of 2.2dBi
    • Visual indicators (multi-color LEDs): for System and Radio status
    • Reset button: factory reset (during device power up)
    • Serial console interface (proprietary; optional adapter cable available)
    • Kensington security slot
    POWER SOURCES AND CONSUMPTION
    • The AP supports direct DC power and Power over Ethernet (PoE)
    • When both power sources are available, DC power takes priority over PoE
    • Power sources are sold separately
    • Direct DC source: 412Vdc nominal, +/- 5%
      • Interface accepts 2.1/5.5-mm center-positive circular plug with 9.5-mm length
    • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source
      • Unrestricted functionality with 802.3af PoE
    • Maximum (worst-case) power consumption: 12.3W (PoE) or 10.1W (DC)
    • Maximum (worst-case) power consumption in idle mode: 5.3W (PoE) or 4.4W (DC)
    MOUNTING
    • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling
    • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section for details
    MECHANICAL
    • Dimensions/weight (unit, excluding mount accessories):
      • 150mm x 150mm x 40mm
      • 380g
    • Dimensions/weight (shipping):
      • 190mm x 180mm x 70mm
      • 590g
    ENVIRONMENTAL
    • Operating:
      • Temperature: 0° C to +50° C (+32° F to +122° F)
      • Humidity: 5% to 93% non-condensing
    • Storage and transportation:
      • Temperature: -40° C to +70° C (-40° F to +158° F)
    REGULATORY
    • FCC/Industry of Canada
    • CE Marked
    • R&TTE Directive 1995/5/EC
    • Low Voltage Directive 72/23/EEC
    • EN 300 328
    • EN 301 489
    • EN 301 893
    • UL/IEC/EN 60950
    • EN 60601-1-1 and EN 60601-1-2
    For more country-specific regulatory information and approvals, please see your Aruba representative.
    REGULATORY MODEL NUMBERS
    • AP-207 and IAP-207: APIN0207
    RELIABILITY
    • MTBF: 753,457hrs (86yrs) at +25C operating temperature
    CERTIFICATIONS
    • CB Scheme Safety, cTUVus
    • UL2043 plenum rating
    • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac
    WARRANTY
    • Aruba limited lifetime warranty
    MINIMUM SOFTWARE VERSIONS
    • ArubaOS 6.5.1.0
    • Aruba InstantOS 4.3.1.0

Features

Specs

Display & graphics

Display depth
150 mm
Display height
40 mm
Display width
150 mm, 150 mm

Networking & connectivity

Ethernet port count
1
Ethernet technology
Gigabit Ethernet
Wireless standard
IEEE 802.11ac

Exterior & appearance

Form factor
Ceiling Mountable

Environment & regulatory

Compliance & standards
  • cTUVus
  • Eco friendly
    Eco friendly

    Packaging

    What's in box
    • Instant AP-207 Wireless Access Point
    • 2 x (White) Mounting Clips to Attach to a 9/16-inch or 15/16-inch Flat T-Bar Drop-Tile Ceiling

    Product info

    Brand
    Aruba
    Product line
    Instant
    Product name
    Instant AP-207 (RW) Wireless Access Point
    Product model
    AP-207 (RW)
    Product series
    207
    Product type
    Wireless Access Point
    Vendor
    Hewlett Packard Enterprise
    Vendor code
    JX954A
    Vendor site

    Aruba Instant IAP-207 (RW) 802.11n/ac 2x2:2 Dual Radio Integrated Antenna AP The affordable mid-range Aruba 207 Series access point delivers high performance 802.11ac for medium density enterprise environments. With the integrated BLE and supporting 802.3af power, the Aruba 207 Series AP enables enterprises to improve their work efficiency and productivity with the lowest TCO.

    Customer ratings & reviews

    Be the first to write a review

    Options & accessories

    Related products

    View all Wireless/WiFi from Aruba

    Recently viewed products

    Clear recently viewed products

    About Aruba

    Need help finding something?

    We're here to help so let us know what you're after and we'll see what we can do.

    Contact us now!

    Don't miss out, subscribe today!

    Subscribe to receive news and special offers.

    Have feedback?
    Need help?